Manditory Disclosure

MANDATORY DISCLOSURES

I NAME OF THE INSTITUTION

Name	Government College of Engineering, Chandrapur
Address	Ballarsha bypass Raod, Babupeth, Chandrapur - 442403
State	Maharashtra
Phone No .	(07172) 227274,230299
Fax No.	(07172 - 227334)
Web site	www.gcoec.ac.in
E-Mail	gcoechandrapur@gmail.com

II NAME AND ADDRESS OF THE DIRECTOR

Name	Dr. S.K.Mahajan, I/C. Director of Tech. Education, M.S. Mumbai
Address	3, Mahapalika Marg, Mumbai- 400 001 P.B. No. 1967
Pin Code	400 001	STD Code	022
Phone No.	22692102	Fax No.	22692102
E-Mail	system@dte.org	Web site	www.dte.org.in

III NAME OF THE AFFILIATING UNIVERSITY: Rashtrasant Tukdoji Maharaj,

Nagpur University, Nagpur (M.S.)- 440001

IV GOVERNANCE :

Sr.No.	Particulars	Remarks
01.	Members of the Board and their brief background	As per State Govt. norms and procedures.
02.	Members of Academic Advisory Body
03.	Frequency of the board Meeting and Academic Advisory Body.
04.	Organizational chart and processing.	Refer *
05.	Nature and extent of involvement of faculty and students in academic affair / improvements	As per R.T.M. N.U. Norms.
06.	Mechanism / Norms and Procedure for democratic / good Governance.	As per State Govt. norms and procedures.
07.	Students feedback on Institutional Governance / faculty performance
08.	Grievance redressal mechanism for faculty, staff and students.

* Organizational Chart and Processes.

Director of Technical Education,M.S. Mumbai

Joint Director, Regional Office, Nagpur

Principal

Academic Staff Administrative Staff

Prof. in Mech. Prof. in Instru. Prof. in Electrical W/S Librarian Registrar Storekeeper

Asstt. Prof. Asstt. Prof. Asstt. Prof. Foreman Asstt. Librarian Office Superintendent.

Lecturer Lecturer Lecturer Chargeman Library Attend. Head Clerk

Tech. Lab. Asstt Tech. Lab. Asstt. Tech. Lab. Asstt W/S Tech. Staff Sr. Clerk & cashier

Lab. Asstt. Lab. Asstt. Lab. Asstt. Jr. Clerk

V. PROGRAMMES

a) Name of the programme approved by the AICTE: 4 Year Engineering Degree Course in Mechanical, Electrical, Instrumentation

b) Name of The programme accredited by the AICTE: Nil

c) Details of the programme approved by AICTE:

i) Name: Engineering Degree Course B.E.

ii) Number of seats:30(Mechanical) + 30(Electrical) +30(Instrumentation)

iii) Duration:  4 Years

iv) Cut off mark/rank for admission during the last three years: 50% at XII ^th science for open and 45% at

XII ^th science for Reserved candidates and non zero score in MH-CET

v) Fee: Rs. 24,000/-(Rs. Twenty four thousand only ) As per norms of State Govt. University fees and university exam fees is additionally charged.

vi) Placement Facilities:

a) Through Training and Placement Cell of Institute.

vii) Campus placement in last three years:-- Year 2003-2004 - 09 students of Electrical Engg. are selected and placed in MSEB ( Maharashtra State Electricity Board), 01 student placed in SHAF Board Casting Ltd, New Delhi

viii) Name and duration of programme having affiliation /collaboration with Foreign University (s) / Institution (s)

and being run in the same campus along with the status of their AICTE approval. If there is a foreign

collaboration, give the following details.: Nil

Details of the Foreign Institution/University: Nil.

• Name of the University/Institution
• Address
• Website
• Is the Institution/University Accredited in its Home Country
• Ranking of the Institution/University in the Home Country
• Whether the degree offered is equivalent to an Indian Degree? If yes, the name of the agency which

has approved equivalence. If no, implications for students in terms of pursuit of higher studies in India

and abroad and job both within and outside the country.

• Nature of Collaboration
• Conditions of Collaboration
• Complete details of payment a student has to make to get the full benefit of collaboration.
• For each Collaborative/affiliated Programme give the following:
• Programme Focus
• Number of seats
• Admission Procedure
• Fee
• Placement Facility
• Placement Records for last three years with minimum salary, maximum salary and average salary
• Whether the Collaborative Programme is approved by AICTE? If not whether the Domestic/Foreign Institution

has applied to AICTE for approval as required under notification no. 37-3/Legal/2005 dated 16th May, 2005

VI) FACULTY:

Name of the course	Details of Faculty Available					Nature of Appointment
	Professors (Rs. 16400-22400 scale	Assistant Professors Regular/ Contract (Rs. 12000-18000)	Lecturers Regular/adhoc/ contract (Rs.8000- 13500)	Total	Others/ visiting faculty	Total number of faculty Permanent & Approved by University	Total number of faculty on adhoc / contract Basis
Four year Degree Engineering Programme	01	05	36	42	03	15	27
Electrical Engineering	-	01 + 01	01 +01+09 = 11*	13	-	02	01 + 10 = 11
Instrumentation Engineering	-	01	04+ 02 + 03 = 09	10	-	05	02 + 03 = 05
Mechanical Engineering	01	01	01+07+03 = 11	13	-	03	07 + 03 = 10
App. Science + Applied Mechanics.	-	01	04 + 01 = 05	06	03	05	01
Permanent faculty: student ratio	1:28
All faculty: student Ratio	1:10

*01 system analyst

Branch wise list of faculty members

Mechanical Engineering faculty.

Sr.No.	Name	Designation
01	Prof. P. S. Adwani	Professor
02	Prof. S. D. Londhe	Assistant Professor
03	Prof. S. W. Burande	Lecturer
04	Prof. D. P. Kapoor	Lecturer
05	Prof. P. R. Pachghare	Lecturer
06	Prof. M. T. Shete	Lecturer
07	Prof. S. R. Dhobale	Lecturer
08	Prof. R. S. Mohod	Lecturer
09	Prof. H. D. Ganjare	Lecturer
10	Prof. S. D. Butley	Lecturer (W.S.)
11	Prof. R. M. Pachbhai	Lecturer
12	Prof. A. G. Bhuibhar	Lecturer
13	Prof. Mrs. V. R. Nimbarte	Lecturer

Instrumentation Engineering faculty.

Sr.No.	Name	Designation
01	Prof. M. R. Bongulwar	Asst. Prof.
02	Prof. P. J. Gaidhane	Lecturer
03	Prof. N.M. Karajangi	Lecturer
04	Prof. S. G. Adam	Lecturer
05	Prof. U. M. Thorkar	Lecturer
06	Prof. A. A. Ansari	Lecturer
07	Prof. S. S. Nerkar	Lecturer
08	Prof. N. M. Yeole	Lecturer
09	Prof. A.V. Bordikar	Lecturer
10	Prof. M. S. Patil	Lecturer

Electrical Engineering faculty.

Sr.No.	Name	Designation
01	Prof. A. S. Shindekar	Asst. Prof.
02	Prof. M. T. Dhurve	Asst. Prof.
03	Prof. V. B. Virulkar	Lecturer
04	Prof. V. P. Dongare	Lecturer
05	Prof. P. V. Dhawas	Lecturer
06	Prof. N. G. Barahate	Lecturer
07	Prof. S. V. Hepat	Lecturer
08	Prof. S. R. Nandurkar	Lecturer
09	Prof. D. U. Pokale	Lecturer
10	Prof. A. P. Pinge	Lecturer in Electronics
11	Prof. U. G. Asutkar	Lecturer in Electronics
12	Prof. Mrs. G. J. Tripathi	Lecturer in Computer
13	Prof. A. D. Mandpe	System Analyst

Other Departmental faculty.

Sr.No.	Name	Designation
01	Prof. Shri Kakade	Lecturer in Physics
02	Dr. C. M. Khairnar	Lecturer in Physics
03	Dr. Shamala Doifode	Lecturer in Chemistry
04	Dr. Y. F. Khobragade	Lecturer in Chemistry
05	Prof. B. M. Mohite	Lecturer in Mechanics
06	Prof. V. S. Kulkarni	Lecturer in Maths

No Faculty member had left the institute during last three years, As per Govt. orders some of the staff members have transferred to other govt. institute.

Photograph

VII) PROFILE OF PRINCIPAL

1.Name  :  Prof. P.S. Adwani

2.Date of Birth : 10-10-1956

3.Educational Qualification : B.E. ( Mech )

ME ( Mech- Heat Power)

PhD (Pursuing)

4.Details of Experience ( Academic/ Industrial ) :

i)Employment record(starting from present position)

Sr.no.	University/college	Designation	Period
01	Govt. College of Engineering, Chandrapur	Professor in Mechanical Engg.	10.06.2004 onwards
02	Govt. College of Engineering, Karad	Assistant Professor in Mechanical Engg.	02.07.1997 to 09.02.2004
03	Govt. College of Engineering, Amravati	Assistant Professor in Mechanical Engg.	02.08.1991 to 30.06.1997
04	BVM Engg. College, Vallabh, Vidyanagar	Lecturer in Mechanical Engg.	03.03.1986 to 30.07.1991
05	P. L. Govt. Polytechnic, Latur	Lecturer in Mechanical Engg.	21.03.1983 to 28.02.1986
06	K. J. Somaiya Polytechnic, Mumbai	Lecturer in Mechanical Engg.	01.08.1981 to 07.08.1982

ii)Other related experience-research, industrial etc.:

Organization/Employer

Designation

Period

iii)Consultancy and Sponsored Research activities:

Year

Organization

Project Title

Amount received

5) Area of specialization : Mechanical Engg - Heat Power Group

6) Subject Teaching at under graduate level. : Thermodynamics, Fluid Mechanics, Fluid Power, Automobile

Engineering, Power Plant Engineering.

Subject taught at post graduate level. : I.C, Engine, Design of I. C. Engine, Instrumentation & Mechanical

Measurements.

7) Research guidance.: Master’s level :

No. of papers published in

Masters’s 07 stdents completed M.E. - National Journals : 04

Ph.D. - International Journals.: Nil

- Conferences.: Nil

8) Projects Carried out.

Sr.No.	Name of Project (ongoing)	Funding Agency	Grant Received Rs in Lakh
1	MODROBS- Development of Industry Relevent I.C. Engine Lab	AICTE	6.00

9) Patents. : Nil

10) Technology Transfer: : Nil

11) Research Publications. : 01

12) No. of Books published with details.  : Nil

13) Teaching Load in current academic year : 08

*Profile of all faculty members are enclosed.
VIII) FEE

i)Details of fee

S.No.	Category	CET quota
		Fixed by the State Fee Committee	Being charged by the Institution
1.	Admission / Development Fee	5000	5000
2.	Tuition Fee	15000	15000
3.	University fee (Examination fee, Registration fee etc.)	101**	101**
4.	Hostel fee (Rent etc.)	*	*
5.	Laboratory fee	1600	1600
6.	Library fee	700	700
7.	Any other	1700	1700
Total Fee		24101	24101

** Examination fee is as per R. T. M. Nagpur University, Nagpur rule for Various classes,

* Hostel fee paid separately (Rs. 570/- per year)

ii) Time schedule for payment of fee for enter the programme –At the time of admission in each academic year.

iii) No. of fee waivers granted with amount and name of students : As per state government rules fees concession is given to various categories of students.

iv) No. of scholarship offered by institute : as per state government rules scholarships are awarded to eligible students

v) Criteria for fee waviers /scholarships – As per State Govt. rules .

vi) Estimated cost of Boarding and Lodging in Hostels. Hostel facility is available for 40 girl students. Fees are as per State government rules. College provides no boarding facility.

IX. ADMISSION

· Number of seats sanctioned with the year of approval.

Sr. No.	No. Seat sanction			Year of Approval
	Electrical	Mechanical	Instrumentation
01.	60	60	40	1996-1997
02.	60	60	40	1997-1998
03	60	60	40	1998-1999
04	60	60	40	1999-2000
05	60	60	40	2000-2001
06	60	60	40	2001-2002
07	45	45	30	2002-2003
08	45	45	30	2003-2004
09	30	30	30	2004-2005
10	30	30	30	2005-2006

Number of students admitted under various categories each year in the last three years.

Academic Year/ Category	SC	ST	VJ/DT/NT	OBC	SBC	HANDICAPED	OPEN	TOTAL
2005-06	20	02	05	30	03	--	21	81
2004-05	29	03	06	33	02	--	19	92
2003-04	48	06	10	34	06	--	20	124

· Number of applications received during last two years for admission under Management Quota and number

Admitted. – As this is Government Institute management quota is not applicable.

X. ADMISSION PROCEDURE

· Mention the admission test being followed, name and address of the Test Agency and its URL (website).

· i) MHT- CET – State level Entrance Examination conducted by DMER and DTE, MS, Mumbai jointly for admission to Engineering, Pharmacy and Health science course.- http://www.dmer.org.in/ , http://www.dte.org.in/

· Number of seats allotted to different Test Qualified candidates separately [AIEEE/CET (State conducted

· test/University tests)/Association conducted test] – 100 % to MHT-CET

Particular	Remark
Calendar for admission against management/vacant seats	No Management seats as this is the Govt.Engg.College. and for vacant seats as per State Govt. Notification
· Last date for submission of application.	As per schedule declared by DTE, MS, Mumbai.
· Dates for announcing final results.
· Release of admission list (main list and waiting list should be announced on the same day)
· Date for acceptance by the candidate (time given should in no case be less than 15 days)
· Last date for closing of admission
· Starting of the Academic session.
· The waiting list should be activated only on the expiry of date of main list.
· The policy of refund of the fee, in case of withdrawal, should be clearly notified.

XI. CRITERIA AND WEIGHTAGES FOR ADMISSION

• Describe each criteria with its respective weightages i.e. Admission Test, marks in qualifying examination

etc. : -50% in PCM group at XII ^th science for open and 45% in PCM group at XII ^th science for Reserved

candidates and non zero score in MHT-CET

Mention the minimum level of acceptance, if any: -

.

• Mention the cut-off levels of percentage & percentile scores of the candidates in the admission test for the

last three years.: Non zero score in MHT-CET

• Display marks scored in Test etc. and in aggregate for all candidates who were admitted.: Displayed on DTE M.S.Mumbai website www.dte.org.in

XII. APPLICATION FORM

• Downloadable application form, with online submission possibilities.- Form is available on http://www.dte.org.in/ during admission process.

XIII. LIST OF APPLICANTS

• List of candidates whose applications have been received along with percentile/percentage score for each

of the qualifying examination in separate categories for open seats.: Displayed on http://www.dte.org.in/

• List of candidates who have applied along with percentage and percentile score for Management quota seats.: No Management Quota

XIV. RESULTS OF ADMISSION UNDER MANAGEMENT SEATS/VACANT SEATS – Not Applicable

• Composition of selection team for admission under Management Quota with the brief profiles of members

(This information be made available in the public domain after the admission process is over)

• Score of the individual candidates admitted arranged in order of merit.
• List of candidates who have been offered admission.
• Waiting list of the candidates in order of merit to be operative from the last date of joining of the first list

candidates.

· List of the candidates who joined within the date, vacancy position in each category before operation of

waiting list.-As per schedule, procedure and rules laid down DTE M.S.,Mumbai

XV. INFORMATION ON INFRASTRUCTURE AND OTHER RESOURCES AVAILABLE

LIBRARY:

· Number of Library books/Titles/Journals available (programme-wise)

Sr.No	Course(s)	Number of titles of the books	Number of volumes	Journals
				National	International
1	Mechanical	279	3086	07	07
2	Instrumentation	245	1255
3	Electrical	350	3719
4	Computer	129	835
5	Applied Science	32	838
6	English	50	76
7	Reference	700	783
8	Other	278	358
	Total	2063	10950	07	07

· List of online National/International Journals subscribed. -- Nil

· E-Library facilities – Nil

LABORATORY:

	Details of Laboratories & Workshops
Sr.No		Name of the Course	Name of the laboratory/workshop	Total Area of lab/workshop (Sq. meter)	Major equipment
1		Common	Workshop	450	Welding Transformer M/c,,Lathe High Speed Grinder Portable Wolf,Hack Saw Machine,Circular Saw M/c Air Compressor,Chain Pulley Block Orbital Sander,Bench Drill Machine Wood Turning Lathe,Vernier Height Gauge,Milling Machine,Radial Drilling Machine,Bench Drill Machine Shaping Machine,Heavy Duty Circular Saw,Lath Turn Master, Hand Shearing M/c, Shaping Machine, Milling Tool Dynameters, Grinding Tool Dy. Meter Drill Tool Dynamometer, Milling Right Angle Att., Portable Drill M/c, Lath Tool Dynamometer, O. H. P. Water Cooler
2		Electrical	i) Machine Laboratory	270	D.C. shunt motorcompound generator set DC motor generator set Three phase synchronous motor ( Induction Start) Three phase variable inductive loading unit DC series motor 3.75 Kw 220 V 1500 rpm coupled to DC Three phase alternator set: dc motor DC shunt motor- series generator set
			ii) Measurement Lab		Kelvin double bridge ( Suitable ton measure resistance with current and voltage ) Wheat stone bridge ( Direct Loading Type variable ohm resistance with galvanometer) DC power supply (upto 10 Amp for Kelvin double bridge) Digital frequency meter
			iii) Electronics device circuit Lab.		Function Generator Dyna-85 # 2941 ( Up Kit) Dyna-86 # 452/975 (8086 Kit) Function Generator CRO
			iv) Power Electronics Lab.		Demonstration unit for study of Magnetic Amplifier SCR AC voltage controller AC servo motor speed for que characteristics Parallel inverter SCR motor control unit for DC shunt motor Single phase cycloconverter
			v) Control System Lab.		Type II control system with patch card Claming circuit Type “O” control system Type “,” control system
			vi) High Voltage Lab		Insulation test kit 5 Kv Insulation oil kit HT transfer Insulation oil kit control panel Insulation test kit 75 Kv
			vii) Switch Gear and Protection		Definite time reverse power relay type CCUM Simulation models for Short, medium and long transmission line Relay test set cum secondary injection system
3		Mechanical Engg. Dept.	i) Fluid Power.	350	Pipe friction Apparatus, Bernaullie’s Theorem Apparatus, Orifice & mouth piece Apparatus, Impact of Jet Apparatus, Metacentric Height Apparatus, Renauld’s Apparatus, Notch Apparatus, Multistage Centrifugal Pump, Variables Speed of Reciprocating pump, Jet Pump Test rig, Francis Turbine Test rig, Centirfugal Jet Pump, Gear Pump Test Rig
			ii) Mechanical Measurement		Vacume Measuring System, Vibration Measuring System,Digital Stroboscope, Sound Measuring System, Radiation Pyrometer, Optical Pyrometer, Torque measuring System, velocity Measuring system, Digital Non contact tachometer, Strain measurement system, Pressure measurement system, Displacement measurement system, Load Measurement System, Temperture measurement System, Contact Hand digital Tachometer, Strip chart recorder
			iii) Energy Conversion		Single Stage Air Compressor Testing, Single cylinder 4 stroke petrol engine, Rotary Compressor, Centrifugal Blower testing, Four Cylinder 4 stroke petrol engine testing with hydraulic dynamometer & Morse apparatus, Two Stage Air Compressor
			iv) Theory of Machine		App for Longitudinal vibration of spring system, Motorised Gyroscopic , Static & Dynamic Balancing Apparatus, Proving Ring.
			v) Metallurgy		Hardness testing Machine, Binocular Microscope, Monocular Microscope, Muffle Furnace, Belt Grinder
			vi) RAC		Refrigerator 220Ltr, Ice Cream Maker, Ice Plant Tutor, Air conditioning Testing,
			vii) Heat Transfer		Heat Transfer Natural Convection, Heat Transfer Through Composite Walls,
			viii) CAD		Euipped with 10 computers in department
4		Instrumentation	Microprocessor Lab	219	Microprocessor based 8086 trainer with ASCII keyboard, Microprocessor based communication system, 8086 Microprosser trainer kits, 8085 Microprosser trainer Kits
			Instrumentation and measurement lab		Instrumentation tutor, Pigmi propeller type current meter, Pigmi water current meter, Pigmi magnetic water current meter, Propeller type meter for very high velocity, Maximum and minimum thermameter, Cup anemometer Decade capacitance box,decade inductance box, Kit for Study of Theveniness , Nortons, superpositionm , reciprocity theorem with & power supply, Kit to study of Desauty Bridge, Anderson bridge, Maxwell bridge, wheatstone bridge with buillt in power supply, Sound measuring system Radiation pyrometer and optical pyrometer, Microprocessor based educational programable tranducer Microprocessor based Instrumentation tranducer, Microprocessor based controller trainer, Displacement Transducer ( LVDT), Velocity measuring system, Pressure measurement system, Temperature measuring system, Strain measurement system, Digital PH meter
			Electronics Lab		D &A Converter, Digital logic laboratory ( CMOS ), Study of Synchronus counter Universal shift register, Study of Even / Odd parity checker, Study of Multiplexer,demultipexer, Digital logic laboratory ( TTL ), Study of A to D converter, Study of Asynchronus up / down counter, Measurement of input impedence,offset voltage,offset current of op-amp,Measurement of slew rate of op-amp, Study of op-amp ( Adder & Substracter ), Test signal, generator,dual trace CRO, dual power supply, digital multimemter,variable , power supply,digital multimeter, Study of phase loop using 565, Study of op-amp as II order hi-pass filter,band pass, band reject filters, Study of op-amp as voltage follower,integratorand, differentiator, Study of op-amp as inverting & noninverting amplifier, Microprocessor based linear IC trainer, Microprocessor based digital logic trainer, Dual Trace CRO With Probe,Dual Power supply,Function Generators, Electronic counter meter Dual channel digital storage oscilloscope, kit for Study of ring counter,mod N counter,ripple counter
			Process Lab		PLC Training System, Flow control Loop, Pneumatic Trainer Kit Microprocessor based controller trainer Microprocessor based process control ckt with printer
5		Applied Science & Other Department.	i) Physics Lab.	80	Double Channel CRO- 25 Mhz, Dual Trace
			ii) Chemistry Lab.	100	PH meter, Conductometer/ Conductivity meter, Calory meter, Potention meter, muffle furnace, Conradson’s apparatus ( carbon residue), Ables’s apparatus, oven, Red wood viscometer no.1 and no2 , Digital one pan balance, High volume air sampler, Refrigerator
			iii) Applied Mechanics Lab.	80	Universal Testing machine, Impact testing machine, Brinell Hardness Test machine, Parallel forces Apparatus, Torsion apparatus
6		Computer Centre.	i) Computer Centre.	64	P IV, P III, PI, Computer, Laser & Dot Matrix Printer, UPS.

· List of Experimental Setup: All the experiments as per the curriculum of R.T.M., Nagpur University can be performed in various laboratories of Institution . List enclosed herewith.

COMPUTING FACILITIES:

· Number and Configuration of Systems – 45 (PIV- 34, PIII – 04, PI- 07.)

· Total number of systems connected by LAN: -  LAN-I: computers connected 19

LAN-I: computers connected 12

· Total number of systems connected to WAN -- Nil

· Internet bandwidth -- 64 Kbps through PSTN connection; 115 Kbps through reliance connection

· Major software packages available – MATLAB6.5, PSCAD, Pispice, Pisim demo, VB 5.0, Borland C++, FoxPro, MS Office XP, Norton Antivirus 2004.

· Special purpose facilities available --

WORKSHOP:

Ø List of facilities available.

Welding Transformer M/c,Lathe High Speed Grinder Portable Wolf, Hack Saw Machine, Circular Saw M/c, Air Compressor, Orbital Sander Bench, Drill Machine, Wood Turning Lathe, Milling Machine, Radial Drilling, Drill Machine, Shaping Machine, Heavy Duty Circular Saw, Lathe Turn Master, Hand Shearing M/c, Portable Drill M/c.

· Games and Sports Facilities: All the major sport kits are available in college.

· Extra Curriculum Activities: Various extra curricular activities are carried out through out the year.

· Soft Skill Development Facilities : Various soft skill development programs are arranged through out the year Number of Classrooms and size of each- 07 Total Area: 675 sq. m.

· Number of Tutorial rooms and size of each: 03 Total Area: 235 sq.m.

· Number of laboratories and size of each: Total Area: 1507 sq.m

· Number of drawing halls and size of each: 01 Total Area: 340 sq.m.

· Number of Computer Centres with capacity of each: 02 Total Area:102.5sq.m.

· Central Examination Facility, Number of rooms and capacity of each.: All classrooms (10) and Drawing Hall is used for examination

Teaching Learning process

• Curricula and syllabi for each of the programme as approved by the University.:- Syllabi of all courses is Enclosed
• Academic Calendar of the University: Copy of academic calendar for academic year 2005-06 is enclosed
• Academic Time Table: Copy of academic time table is enclosed
• Teaching Load of each Faculty:- Teaching load of all faculties is enclosed
• Internal Continuous Evaluation System and place: Two Sessional exams in a semester for each course are conducted in a institute.
• Students' assessment of Faculty, System in place: Feedback from students are taken in concerned department